Users Guide

There is not much documentation right now, but some of the documentation for an older version of the system is still useful: [1] . Also, the Documents Section in the Main Page has links to a number of papers that contain information on the various features of the system.

Alternatively, you can subscribe to the vistrails users mailing list. Details are on how to do that, are available here.

Getting_Started

VisTrails is available on Windows XP, Mac OS X, and Linux. These versions all have the same functionality and only differ in user interface as noted throughout this document.

There are different download options, available here. It is substantially easier to start with a binary version, and this is encouraged for first-time users. If you decided on a source version (maybe because a binary version for your architecture is not available at this time), please follow the instructions on building the software from source available here.

Starting up the binary version is system depended. On Windows XP and Mac OS X, it requires clicking on the application icon. To start the binary version on any system, you should change directory to "src/vistrails/trunk/vistrails/", where the "vistrails.py" file is available. You can start VisTrails with the following command: "python vistrails.py -l".

Depending on a number of factors, it can take a few seconds for the system to start up. You will see a splash screen while that happens. On the console, you will see some messages that show the packages being loaded. On my Mac OS X system, I get the following:

 Initializing  vtk
 Initializing  pythonCalc
 Initializing  spreadsheet 
 Loading Spreadsheet widgets...
   ==> Successfully import <Basic Widgets>
   ==> Successfully import <Image Viewer>
   ==> Successfully import <VTK Viewer>
   ==> Successfully import <HTML Viewer>
   ==> Successfully import <SVG Widgets>

Also, I get two separate windows, the VisTrails Builder:

And the VisTrails Spreadsheet:

You are now ready to load a vistrail inside the system. Go to the Builder, and under "File", there will be an "Open" option. After clicking it, you will be giving a list of files, and you can load any of the vistrails there. For instance, if you load the "vtk_book_3rd_p189.xml", your screen will look like this:

Each "oval" correspond to a different workflow. If you click on "final", you can "execule" that workflow either by clicking on the execute the workflow icon: .

More details on interacting with the components of VisTrails are available below.

VisTrails Builder

You can create and edit dataflows (workflows) using the Vistrail Builder user interface. The dataflow specifications are saved in a repository that can be either local or remote. For now, we only discuss local repository here, which are "xml" files by default.

A key feature of VisTrails is the support for full provenance of the exploration process. For this, we introduced the notion of a visual trail, or a vistrail. A vistrail captures the evolution of a dataflow---all steps followed to construct a set of workflows. It represents several versions of a dataflow (which differ in their specifications), their relationships, and their instances (which differ in the parameters used in each particular execution). VisTrails uses a change-based model to capture provenance. As the scientist makes modifications to a particular dataflow, the provenance mechanism records those changes. Instead of storing a set of related dataflows, VisTrails stores the operations or changes that are applied to the dataflows, e.g., the addition of a module, the modification of a parameter, etc.

This representation is both simple and compact---it uses substantially less space than the alternative of storing multiple versions of a dataflow. In addition, it enables the construction of an intuitive interface that allows scientists to both understand and interact with the history of the dataflow through these changes. A tree-based view allows a scientist to return to a previous version in an intuitive way; to undo bad changes; to compare different dataflows; and be reminded of the actions that led to a particular result.

The Builder is roughly divided into three main regions. In the left, a list of modules that can be used for building particular workflows are listed. The middle is the main workflow interaction area, which can be toggled to display an instance of a workflow, or the vistrail, which corresponds to the collection of a number of different instances. On the right, there is a context sensitive menu that can be used for operating on the properties of what is being shown in the middle.

VisTrails Modules

Modules are the basic building blocks of workflows. In general, each module has a number of inputs, a number of outputs, and a set of parameters that can be configured by the user. A workflow is built by putting a collection of modules together, to achieve a desirable function.

The list of modules available depends on the packages that were loaded by the user. They appear on the left side of the builder, and when the builder is in "pipeline" mode, modules can be dragged from the left, and placed into the workflow. Once modules have been moved, their inputs and outputs can be connected, as long as they have appropriate types.

To change the parameters of a module, first one needs to click on the module. Once that is done, all the methods that can set module parameters will appear on the panel on the right. After the user has determined the method that they want to use, you need to drag the method to the "Properties" panel, which is directly below the "Methods" panel. At this point, you can select the text edit boxes in the panel and type in a value. The labels to the left of each text edit box indicate the parameter input type (double – number with a decimal point or int – whole number) and the name of the parameter. When a module is changed, a new instance of the workflow with the changed parameters is added to the vistrails. (If PIP is turned on, you will see the change immediately in the version tree.)

Using the VisTrails Version Tree

As you make changes to the modules of a workflow, the instances are automatically added to the vistrail. This allows you to go back to a previous version (higher up in the tree), and use a different set of parameters to modify the data without losing any of the changes you have already made.

It is possible to build a very large number of different versions quite quickly with the system. In order to help the user, the system provides a number of different ways of what workflows to show in the version tree. The default is to only show "named" workflows, or the ones that are at the leaves. All other ones are collapsed by default.

To name a workflow, you need to select it while in Version Tree mode. When that is done, the panel on the right will have a "Version Tag" text box that can be used for naming the workflow. You need to type in a name for the module and select the Change button to the right. This will place that name in the selected workflow in the version tree.

Working With Modules

Modules are connected with lines that represent dataflow connection between modules. Modules can be connected or disconnected, and added or deleted from a workflow.

To see how this works, we will change the original data from the vtkQuadric module to a vtkCylinder module in the workflow labeled "final" in the vtk_book_3rd_p189.xml vistrail.

Creating a New Module

Since there are literally 100s of modules, the easiest way to find the module we want is to search for it. On the left panel, where all the modules are listed, there is a "Search" text box on top. As you type "vtkcyli", the system will automatically filter the modules, and at one point, you will be able to see the vtkCylinder module. Alternatively, you could have searched for the module by actually looking at the modules one by one. You can now drag the module to the pipeline.

Creating a Dataflow From Modules

To change the data source from vtkQuadric to vtkCylinder, you need replace the output of the first with the second. Notice that the line connecting each of the modules starts and ends in a small box at the top or bottom of the modules.

To disconnect the vtkQuadric output from vtkSampleFunction, you can select the connection line, and delete it.

To connect the vtkCylinder output to the vtkSampleFunction input, place the cursor over the small box in the lower right corner of the vtkCylinder module, click and hold down the mouse button. Drag the cursor away from vtkCylinder and a line will appear. Drag the end of the line to the left most small input box in the upper left corner of the vtkSampleFunction module and release the mouse button. The line now connects vtkCylinder and vtkSampleFunction.

To check that you were successful, just execute the pipeline, and the result should appear on the spreadsheet. The data in the cell shows a series of cylindrical shapes.

The input ports of the module will only accept connections from correct output ports. Dropping a connection on a module will cause it to snap to the nearest appropriate port. However, when a module accepts multiple ports of the same type, care must be take as to how the connection is made. The easiest way to ensure proper connectivity is to begin the connection at the module with multiple ports of the same type and drag it to the appropriate endpoint. To determine the exact port to begin at, simply hover the mouse cursor over the port to query and a small note will be displayed with information about the port in question.

Accessing Module Parameters

You will notice that when you select the vtkCylinder component in the visualization panel on the left, there are no parameters to adjust in the lower right panel on the right. Only the parameters that have been modified by the user are displayed to prevent clutter.

To modify a parameter from its default setting, clickon the word SetRadius and continue to hold down the mouse button. SetRadius becomes highlighted. With the mouse button still held down, drag the cursor to the "Properties" panel directly below. A parameter text edit box is shown for SetRadius. You can enter a new radius size for the vtkCylinder component.

VisTrails Spreadsheet

Advanced Topics

VisTrails Packages

Examples

Working with Web Services and HTML (Work in progress)

In this example, we will build a very simple pipeline that invokes a web service and publishes its results on a html page. We will build a page displaying the exchange currency rates of three countries.

In order to do that, first you have to enable the webServices package in your startup.py file by adding the following lines:

   addPackage('webServices', 
               wsdlList=['http://www.xmethods.net/sd/2001/CurrencyExchangeService.wsdl']
             )

wsdlList is a list of urls pointing to a WSDL (Web Services Description Language) document which describes a Web service. If you know other urls and want to use them in VisTrails you might want to add them.

The webService package will generate a module for each published method in a web service. In our example, we will be interested in the getRate method of CurrencyExchangeService.

Creating a new VisTrail

Start VisTrails. On the Builder Window, click on New button at the top left of the toolbar to create a new VisTrail.

The Builder Window will now look like this:

Adding Modules to the Pipeline

At this point, we must begin to add modules to our pipeline.

In the Search field of the Modules Panel (the rightmost pane of the Builder Window), type in getRate. You will notice that a module under the WebService branch will be selected. Now you can add it by clicking-and-dragging (on Mac also hold alt key) it over the Pipeline View area represented by the darker grey canvas on the Builder Window. This module acquires the exchange rate between 2 countries. We need to add more modules that provide input for getRate module and other modules that will receive getRate module output. In the same way described above, add the following modules (the number in parenthesis represents the number of modules you should add):

String (3)
getRate (1)
PythonSource (1)
RichTextCell (1)

After adding these modules, your builder should be similar to the one shown below.

The modules described above were added to the pipeline view, but remain unconnected. This is a good point for us to save our work. First we will name this pipeline as modules. To do that, we need to switch to the version tree view by selecting the Version Tree tab in the top pane on the right of the buider window. In the Version Tag field type in modules and click on change. Your version tree should now look similar to this:

Now we save our work by clicking on the Save button (the third from left to right on the Builder Toolbar) or pressing Ctrl+S (Command + S on Mac). Give a name to your file, such as tutorial_webservice_html.xml.

Connecting Modules in the Pipeline

Now that we have all the modules necessary to process our data, we must connect them properly to fully form our processing pipeline. Each module box has a set of input ports, located in the upper-left hand corner of the box, and a set of output ports, located in its lower-right hand corner. In order to connect two modules together, click-and-drag the appropriate output box contained in the module to the module using it as its input. For modules that have more than one input/output, you can see the type of each individual port when hovering the mouse (as a tooltip). VisTrails will also snap a connection to matching ports.

So, for example, by clicking and dragging the rightmost output port of the String module to one of the input ports of getRate module, a connection will be made between the two modules. This connection is indicated by a solid black line. Now we must continue connecting our pipeline. Add connections between the following modules:

The input port 2 of the leftmost String to the input port 1 of the leftmost getRate
The input port 2 of the middle String to the input port 2 of the leftmost getRate
The input port 2 of the middle String to the input port 1 of the rightmost getRate
The input port 2 of the rightmost String to the input port 2 of the rightmost getRate

Your pipeline should look like this:

Module Customization and Parameterization

You can notice that the PythonSource module does not contain any input or output port. This module is designed to contain any piece of Python code. So we as pipeline builders, we must define the input and the output ports and include the piece of code to manipulate the inputs and generate outputs. We are going to use this module to create our html page.

First, double-click on the PythonSource module. A new window called PythonSource Configuration will be shown.

Add two input ports, value1 and value2, both of type Float (the same output type of getRate module) Add a output port, htmlFile of type File.

Now fill in the text area the following code:

 import datetime
 value1 = self.getInputFromPort("value1")
 value2 = self.getInputFromPort("value2")
 text = '<HTML><TITLE>Exchange Currency Rate Table </TITLE><BODY BGCOLOR="#FFFFFF">'
 text += '<TABLE WIDTH="70%" BORDER="1" BGCOLOR="#FFFFFF" CELLPADDING="4"> '
 text += '<TR><TD>USA</TD><TD>Brazil</TD><TD><B>'
 text += str(value1) 
 text += '</B></TD></TR><TR><TD>Brazil</TD><TD>China</TD><TD><B>' 
 text += str(value2)
 text += '</B></TD></TR>'
 text += '<TR><TD colspan="3" align="right">Last updated on: '
 text += datetime.datetime.now().strftime("%m-%d-%Y %I:%M:%S")
 text += '</TD></TABLE></BODY></HTML>'
 output = self.interpreter.filePool.createFile()
 my_file = open(str(output.name), 'w')
 my_file.write(text)
 my_file.close()
 self.setResult("htmlFile",output)